DM–188 Stericlean Horizontal Laminar Flow Cabinet (Exclusive)

STERICLEAN offers a comprehensive range of high performance Horizontal, Laminar Flow Clean Air Cabinets. Modular construction, combining aesthetic appeal with functional utility and efficiency. These are designed to meet the filtration, illumination, Noise & Vibration requirements and US Federal Standard 209 B (BS 5295), providing air to meet class 100 (class I) conditions, to the extent applicable.
Ideal for microbiological manipulations, work with bioassays sterility testing & research work, vial filling & bunging operation in parenteral units & for general dry-processing work in semiconductor industry etc. Provides a comfortable ‘sit down’ working position for the operators.

Construction :– All Laminar Flow Clean Air cabinets are basically constructed out of thick teak wood board, which is termite and insect proof, fire retardant and weather resistant. All exterior surfaces are covered with white Laminates. Interior surfaces are epoxy painted. Work table is made of mica top and side panels of thick transparent plexiglass.

Air Flow and Filtration :– Laminar Flow principle involves double filtration of air. Atmospheric air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all airborne particles of size 0.3 micron and larger. Double filtered air blows in laminar flow through the work table at designed velocity of 90 ft. min. ± 20%.

Blower Motor Assembly :– Duly balanced, direct drive motor blower units sized to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with reputed make motor and operates with minimum noise level i.e. lower than 65 db on scale and Vibration less than 2.5 um.

Lighting :– Work area properly illuminated by diffused, glare free fluorescent light.

Power Requirement :– 230 V. 1 Phase, 50 Hz, Ac Supply.

Optional Accessories :–
• Satin finish S.S. Table Top (in lieu of Formica Top)
• Transparent front door
• Static Pressure. Inclined Manometer
• Built in U.V. Germicidal light
• Cock for gas, air or vacuum line
• Cold rolled MS Sheet body duly powder coated.
• Stainless steel body duly polished.
• Particle dust count validation at site after installation.

Spare Accessories :–
• HEPA Filter
• Pre Filtern.

Available in following models :–

Model	HL–22	HL–32	HL–42	HL–62	HL–82
Working Area	2’×2’×2'	3’×2’×2'	4’×2’×2'	6’×2’×2'	8’×2’×2'
Size of HEPA filter	2’×2’×6'	3’×2’×6'	4’×2’×6'	3’×2’×6'	4’×2’×2'
No. of HEPA filter (Supplied with main unit)	1	1	1	2	2
No. of Pre filter (Supplied with main unit)	1	2	2	3	4
Illumination	1×20 W	1×20 W	2×40 W	2×40 W	4×40 W

DM–188A Horizontal Laminar Flow Clean Air Cabinet : Table Top Model (New)

These equipment are also horizontal laminar flow cabinets. These are table top models and not floor mounted. These can be easily placed on exiting laboratory platform. However if required, tubular stand can be provided for these laminar flow cabinet & for its work table, if these equipment are to be used as floor mounting design.

Optional Accessories :–
• Satin finish S.S. Table Top (in lieu of Formica Top)
• Transparent front door
• Static Pressure. Inclined Manometer
• Built in U.V. Germicidal light
• Cock for gas, air or vacuum line
• Tubular Stand
• Cold rolled MS Sheet body duly powder coated.
• Stainless steel body duly polished.
• Particle dust count validation at site after installation.

Spare Accessories :–
• HEPA Filter
• Pre Filter

 

Model	HL–32A	HL–42A	HL–62A
Working Area	3’×2’×2'	4’×2’×2'	6’×2’×2'
Size of HEPA filter	3’×2’×6'	4’×2’×6'	3’×2’×6'(×2)

Model	VL–22	VL–32	VL–42	VL–62	VL–82
Working Area	2’×2’×2'	3’×2’×2'	4’×2’×2'	6’×2’×2'	8’×2’×2'
Size of HEPA filter	2’×2’×6'	3’×2’×6'	4’×2’×6'	3’×2’×6'	4’×2’×2'
No. of HEPA filter (Supplied with main unit)	1	1	1	2	2
No. of Pre filter (Supplied with main unit)	1	2	2	3	4
Illumination	1×20 W	1×20 W	2×40 W	2×40 W	4×40 W