YSPL526
York Laboratory Mill
---Willey type
For
preparation of samples for analysis with minimum loss of moisture
or volatile constituents. Weight distribution and balancing of rotating
parts has been adjusted to provide greater stability and quieter
performance with reduced vibration.
Suitable for wider variety of commercial materials. Fitted with
1/4 HP motor, supplied with nickel plated hopper of 50 mm dia with
cover, three delivery sieves, having tops of 20, 40 and 80 mesh
respectively, with plastic receiver, brush, L-N key, cord and plug.
Suitable to operate on 220 volts, 1 Ph, 50 cycles AC supply.
YSPL527
York Laboratory Mill
---Willey type
Description
as per YSPL-526 but fitted with 1/2 HP motor, 75 mm dia hopper.
YSPL528
York Laboratory Mill
---Willey type
Description
as per YSI526 but fitted with 1 HP motor and 100 mm dia hopper,
suitable for heavy duty applications.
YSPL530
York Vacuum Pump
YORK
has range of oil sealed single and double stage high vacuum rotary
pumps. These are designed to be easy to install and maintain. Quite
and reliable in performance. These can be used for many Laboratory
& Industrial applications without accessories. Vacuum pumps
are V Belt driven and fitted with capacitor start Crompton/AUE or
equivalent electric motor mounted on base plate. All the parts are
precisely machined, and assembled to close tolerance for high efficiency.
Pumps are supplied either single stage or double stage. Single stage
pump creates maximum vacuum of 0.01 mm Hg. column and double stage
creates 0.001 mm Hg.
Suitable to work on 220 V, 1 Ph, 50 Hz AC Supply. Following is the
range of York Vacuum Pumps (Single/Double Stage)
S.No. Model Capacity Motor
1. YVP 25 25 lt./mt 0.25 hp
2. YVP 45 45 lt./mt 0.25 hp
3. YVP 75 75 lt./mt 0.25 hp
4. YVP 100 100 lt./mt 0.5 hp
5. YVP 150 150 lt./mt 0.5 hp
6. YVP 200 200 lt./mt 1.0 hp
7. YVP 300 300 lt./mt 2.0 hp
Note : Higher capacity can be supplied on request.
Optional Accessories :
High Vacuum Oil.
Vacuum gauge and regulator.
Moisture trap.
|