YSI–507 York Laboratory Stirrer

It is specially designed for Laboratory bench work and has a speed range upto –4000 rpm. It is fitted with variable speed controller for general purpose every day laboratory stirring work.
The motor is mounted on a stand consisting of metal base which can be placed any hard working bench of the laboratory at best suited working position. Accurate positioning of stirrer will help reducing noise. The motor position can easily be adjusted on the stand.
Fitted with an universal motor 1/20HP, 4000 rpm and electronic regulator. Suitable to work at 220Volt, single phase 50 Hz AC supply.

YSI–512 York Vortex Mixer
---Test Tube Mixer

It is useful for rapidly mixing/agitating solution in test tubes. The vibrating neoprene rubber cup accommodates a variety of sizes of test tube/flasks.

Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tubes. The housing is 150 × 150mm approx. The Vacuum Rubber pads are provided at bottom. Machine supplied with complete with speed control, cord and ON/OFF switch and indicator to work on 220V, 1Ph, 50 Hz. AC supply.

YSI–514 York Shaking Machine
--- For Flask – Wrist Action

Rugged construction, heavy base, rated for continuous use. The shaking speed action is variable. The degree of agitation, gentle to violent, is controlled by speed regulator. The Erlen Meyer flasks from 125 to 1000 mi capacity can be shaken at one time even without balancing. The full torque is always applied to oscillating mechanism irrespective of speed setting. Fitted with fraction H.P. motor, cord and plug to work on 220 Volts, 1 Ph, 50 Hz, AC supply.

Available in following capacities :–
• 4 Flask
• 8 Flask

Optional Accessories :–
• Timer 0-30 mts.

YSPL–515 York Shaking Machine
---Khan Type

The machine can accommodate Kahn Racks, bottles or flasks of different sizes by adjusting the compartments with the help of rods supplied with the machine. Fitted with 1/4 H.P. motor and having mechanical arrangements for adjusting the motion.

Number of oscillation fixed at 280 ± 5 per minute. Supplied complete with top platform rods, ON/OFF switch, plug and cord, to work on 220 Volts, 1 Ph, 50 Hz AC supply.