The CompanyProduct RangeClientele
Contact UsBusiness OpportunitiesWebsite FeedbackMail UsGo to Homepage...
Dressing Drum

YSI–400 Yorco Dressing Drums (Shallow Sterilizer)

Bearing ISI Mark : IS – 3831

Seamless made of S.S. Bearing ISI Mark IS:3831 Dressing Drums are made of Stainless Steel sheet by deep draw process & confirm to ISI specifications. These are ideal for sterilization of Gauges, Dressing Cotton, Gloves, surgical instruments used in operation theatres and emergency wards.


• 225 × 225 mm
• 275 × 240 mm
• 275 × 130 mm
• 350 × 240 mm
• 350 × 130 mm



YSI–401 Yorco Portable Autoclave

Bearing ISI Mark : IS – 8462

Suitable of general laboratory use as well as for field sterilization of instruments and dressings etc. Dome shaped S.S. lid is provided which seals the autoclave with neoprene jointless gasket. The lid is tightened to the body when closed. The working pressure is 1.1 to 1.2 Kg./cm2 (15-18PSI).
The sterilizer is made of S.S. Sheet deep drawn to cylindrical shape. The seamless construction allow no bacteria residue & free from dirt accumulation. It is equipped with dial pressure gauge 0-60 PSI, spring loaded safety valve, dead weight type safely valve and steam release valve.
The load is held in dressing drums (optional), which is supported on a stand (tripod) the autoclave is hydraulically tested at twice the working pressure as per ISI requirement. It is fitted with ISI marked heater. Supplied complete with plug & cord.
Suitable to work on 220/230 Volt, single phase, 50 Hz, AC supply.

350 × 300-325 mm

Optional Accessories
• Dressing Drum






Copyright © YORCO. All rights reserved.